The most convenient end assembly kit. Load on and go!
Are you looking for an end assembly that doesn't require any welding or drilling? Once you drive your strainer post in, our bolt-on round post assembly kits take less than five minutes to install.
If you are looking for an easy and quick to install strainer assembly kit, then our kits are perfect for you. Once your strainer post is in, all it takes is five minutes and your end assembly is done.
This can save you hours of work. You could easily knock out 10 to 30 assemblies in a day compared to the average 2 or 3.
If you only have the one assembly to install, then you can spend the rest of your day doing something else that will make you more money. (Or you could enjoy the day sitting on your verandah with a cup of coffee.)
Our kits are all made from steel and are either hot dipped galvanised, galvabond or stainless steel. This means they are termite proof, fire proof and long lasting.
These kits are perfect if you have a pneumatic driver or proper setup. If you are looking to drive your posts in by hand, we recommend you purchase our our Drive-Tight strainer post kits. They take less than 15 minutes to drive your post in and install the strainer kit!
With this kit you have the choice of a 80NB or 100NB strainer post. Each strainer post is slight longer and thicker that your standard post, allowing you to drive it in. You can also choose between a 40NB stay (good general purpose stay), or a 50NB stay (more heavy duty).
Good products. Easy to use.
|Code||Post Ø||Post Wall Thickness||Post Length||Stay Ø||Stay Wall Thickness||Stay Length||Units Per Pack||RRP Per UnitInc. GST|
INCLUDED: Driveable Post, Cap, Stay, Post & Stay Connectors, Footplate, & Tension Assembly.
Firstly, you will need a pneumatic driver to install a drivable round post. If you need something that can be driven in by hand, we recommend are Drive-Tight Post End Assembly Kits which are featured in the video.
In this video, we also show how you can install the fitting kit to your steel post.
Still have questions? Contact us today
Our tube spanners are designed specifically to tight the tension cables that come with many of our end assembly kits. It is suited for an 18mm nut (M12). The spanner is 450mm long to fit over the end of the cable assemblies long eye bolt. The extra long socket allows you to tighten the nut quickly and easily.
It suits a 0.5 inch drive for your compact drill and can also be used with a standard ratchet.
|Code||Length||Nut||Drive||Units Per Pack||RRP Per UnitInc. GST|
Interested in purchasing our products?
Our products are stocked by a variety of stores all over Australia including stores in New South Wales, Queensland, Victoria, Tasmania, South Australia, Western Australia, Northern Territory and the Australian Capital Territory,