All of our gate kits are made from hot dipped galvanised steel to ensure strong and long lasting kit.
The timber post gate kit comes in two different lengths:
With a 16mm thread, it can be easily installed with an 18mm auger.
Do you want more control over the angle of your gate and how far away it sits from your fence post? Our gudgeon stop is fully adjustable. The top strap is also fitted with an adjustable keeper plate to keep your gate locked in nice and tight without any unwanted movement.
The nylon gudgeon itself is non-tapered except for the slight tapering at the top so you can easily push your gate on. Within the gudgeon is a metal pin for added strength.
It has been designed to be taller than most other gudgeons for extra secure. The longer length means that it is harder to pull the bottom of the gate off.
And if you are worried about UV damage, the nylon gudgeon is designed to fit fully inside the gate where the sun can't reach it.
LARGE 50mm Washers
This ensures the gate kit doesn't pull through the post.
|Code||Gate||Post Ø||Units Per Box||RRP Per UnitInc. GST|
Spring Hook Latch
Spring Ring Latch
Oval Ring Latch
This video shows you how you can install a gate kit onto your timber post.
In this video, the Low Loc timber post kit is used. However, the process is essentially the same.
The only difference is with the bottom gudgeon you would be drilling two holes above one another (north/south), rather than next to one another (east/west).
Still have questions? Contact us today
Interested in purchasing our products?
Our suppliers service all over Australia including: