Get Your Gate Close To The Ground
Looking for a low level, and easy to mark out timber post gate kit? Our bolt-through ‘Low Loc’ timber post gate kits are strong and easy to install.
Drill or Post Borer
18 mm Auger
Adjustable In & Out
50 mm Washers
About Our Low LOC Gate KIts
The ‘Low Loc’ (east-west) design enables you to get your gate close to the ground. This helped you keep stock in and predators out.
All of our gate kits are made from steel and are hot dipped galvanised to ensure strong and long lasting kit.
With a 16mm thread, it can be easily installed with an 18mm auger.
Adjustable Nylon Gudgeon
Do you want more control over the angle of your gate and how far away it sits from your fence post? Our gudgeon stop is fully adjustable. The top strap is also fitted with an adjustable keeper plate to keep your gate locked in nice and tight without any unwanted movement.
The nylon gudgeon itself is non-tapered except for the slight tapering at the top so you can easily push your gate on. Within the gudgeon is a metal pin for added strength.
It has been designed to be taller than most other gudgeons for extra secure. The longer length means that it is harder to pull the bottom of the gate off.
And if you are worried about UV damage, the nylon gudgeon is designed to fit fully inside the gate where the sun can’t reach it.
How To Install A LOW LOC GATE KIT
In this video we walk you through the installation process for our bolt-through ‘Low Loc’ timber post gate kit. Check it out.
- A bottom gudgeon with a 25NB nylon bush.
- Top strap.
- A removable keeper plate.
- Four nuts and four 50mm washers.
- Your choice of latch (below).
Find Your Local Stockist
With almost 500 stockists Australia wide, we’re sure you’ll find a local store near you.