Heavy duty striker plates that won’t bend on you.
Are you looking for a strong striker plate for your yard? You can trust that your latches will lock into place with our sturdy strike plates.
Simple to Install
About Rotech’s Striker plates
Our zinc plated striker plates are made from quality steel to ensure a sturdy plate that won’t bend on you.
Each plate is angled. As you shut the gate, your latch pin will compress as it moves up the angle. As soon as it hits the hole, the spring shoots in, locking the gate. You can slam your gate fast or hard. If a cow is about to run out the gate, you can shut it and trust that it will lock in and not swing past the post.
Single sided or double sided striker plates are available. If your gate operates one way, then a single sided plate is perfect. If you have a gate that swing both ways then your can get a double sided plate.
Trusty steel striker plates (that won’t bend).
Tips When Installing A Striker Plate
- When installing a single-sided striker plate, make sure it lines up with your cam latch. This will mean that the plate will be positioned slightly to one side of the post or frame.
- When installing a double-sided striker plate, make sure it is centred on the post or frame.
- Tack your striker plate into place and make sure it works. When you are happy with its position, fully weld it into place.
Find Your Local Stockist
With almost 500 stockists Australia wide, we’re sure you’ll find a local store near you.