Picket Post Driver
Heavier. Stronger. Anti-Shock.
10.5kg. Anti-Shock Handles. Built-in Locator Pin. The heaviest, smartest hand driver you can buy.
Drive Star Pickets Straight, Without The Wobble
The 60mm barrel sits snug on a standard star picket, so the driver runs true instead of rattling around. The built-in Locator Pin lets you correct alignment mid-drive, and the anti-shock handles save your arms on a long run. Heavier by design, so the driver does more of the work.
*Retail pricing shown is a guide only. Prices will vary depending on store location and quantities. Freight costs are not included in this price guide. All pricing includes 10% GST.
How The Rotech Rural Picket Post Driver Is Different
DRIVE STRAIGHTER. More Control.
60mm ∅ for standard star pickets. Snug fit. Less wobble. A built-in Locator Pin lets you twist the picket mid-drive to correct alignment.
ANTI-SHOCK HANDLE DESIGN
HANDLES That Make Your Job Easier.
Most post drivers have the handles welded straight to the pipe. Every strike sends the full force of impact through the welds and your hands.
The Rotech Picket Post Driver has the handles welded at the top. An Anti-Shock Handle sleeve sits below, absorbing vibration before it reaches your grip. The additional 90mm driver weight at the top makes the posts go in with less strikes. Less vibration, more comfortable for everyday use.
BUILT TO LAST
AUSTRALIAN DESIGNED. PADDOCK PROVEN.
Heavy-duty steel. Quality powder coat. Designed in Australia by a family-owned company in rural fencing since 1998.
HEAVIER BY DESIGN
MORE WEIGHT. MORE FORCE. FEWER SWINGS.
10.5kg. Heavier than every other hand driver on the market. More force per swing. Fewer swings to depth. More posts per hour.
The physics are simple: at the same swing speed, a heavier driver delivers more force into the picket. That means fewer swings to get each picket to depth, less fatigue by the end of the day, and more posts in the ground per hour.
Comparison to Other Picket Drivers
| Feature | Rotech Rural Picket Post Driver | Other Picket Drivers |
|---|---|---|
| Handle Mount |  Top-welded with Anti-Shock sleeve below. Vibration absorbed by Anti-Shock sleeve. |  Side-welded to pipe. Full impact through handles |
| Gussets |  Smooth sleeve surface. No gussets needed |  Sharp plate edges at handle joint |
| Diameter & Alignment Control |  60mm Diameter. Sized for standard star pickets. Snug fit. Built-in Locator Pin. Twist to correct mid-drive |  90mm Diameter. Oversized to fit multiple picket sizes. No locator pin or way to correct the post. Need to pull out and start again. |
| Weight |  90mm driveweight – More mass = More force per swing. Total Weight – 10.5kg | 20-25mm driveweight – Lighter weight = More swings to drive a picket. Total Weight – 9 – 9.5kg |
The Full Details
PICKET POST DRIVER. SORTED.
The Rotech Picket Post Driver is the heaviest, most controlled hand driver available in Australia. At 10.5kg, it puts more force into every swing than lighter alternatives. Fewer swings per picket. Less fatigue. More posts in the ground.
Anti-Shock Handle Sleeve
Other drivers weld the handles straight to the side of the pipe. Every impact goes through the weld. Over time, those welds fatigue and the handles break off. Gussets delay the failure and add sharp edges that cut your hands.
The Rotech welds the handles at the top of the driver head. Below that, a separate Anti-Shock Handle sleeve sits between the weld joint and the lower tube. The sleeve absorbs vibration before it travels up through your grip. Less shock through your hands and arms over the course of a day.
Locator Pin
Most drivers use an oversized diameter to fit both large and small pickets. Loose fit means less control, more wobble, and bent pickets.
The Rotech is sized for standard star pickets. The snug fit gives you direct control over where the picket is going. A built-in Locator Pin lets you twist mid-drive to correct alignment and keep your fence line straight. Fewer bent pickets, less rework, cleaner lines.
Weight Advantage
At 10.5kg, it’s heavier than every major competitor. At the same swing speed, more mass puts more kinetic energy into each strike. More force per swing means fewer swings to depth, less fatigue, and more posts per hour.
Built for Australian Conditions
Designed in Australia by a family-owned company in the rural fencing business since 1998. Heavy-duty steel with a quality powder coat finish. The Anti-Shock Handle sleeve sits between the weld joint and your grip, absorbing impact vibration that destroys side-welded handles on other brands.
Picket Post Driver
Common Questions About the Picket Post Driver
Can’t find what you’re looking for? View all FAQs or get in touch.
The extra weight works for you, not against you. Each swing carries more force, so you need fewer of them. Most users find the net effort across a day is less, not more.
The built-in Locator Pin lets you twist and reposition the picket mid-drive to correct alignment. Keeps your fence line straight without stopping to pull the picket out and start again.
More weight means more drive force per swing. At 10.5kg, you need fewer swings to get each picket to depth. That means less fatigue over a full day and more posts in the ground per hour.
The Rotech Picket Post Driver is sized specifically for standard star pickets. The tighter fit gives you more control than oversized drivers that try to fit every picket size.
Most drivers weld the handles to the side of the pipe. Every impact goes straight through those welds. Over time they fatigue and break. The Rotech welds the handles at the top and uses a separate Anti-Shock Handle sleeve below to absorb vibration before it reaches your grip. Less stress on the joint. Less shock through your hands.